Knowledge
-
11
Dec
What are the common faults and solutions of High Temperature Sample Dyeing Ma...1. Sealing ring (gasket) problem: The most important daily maintenance of high temperature and high pressure dyeing machine is the sealing ring. Poor sealing performance will lead to cylinder differen
Read More -
09
Dec
Safe operation of High Temperature Sample Dyeing Machine1. Special operation staff should be certified to work, and ensure that operators have the corresponding qualifications and training. 2. Wear labor protection equipment and check whether all parts of
Read More -
06
Dec
Common forms of wear of the stirring paddle of the stock solution preparation...1. Abrasive wear: Cause: During the working process, the stirring paddle rubs and collides with the solid particles in the dye (such as pigment particles, additive particles, etc.). These solid partic
Read More -
04
Dec
How to check if the stirring paddle of the stock solution preparation system ...1. Appearance inspection: Observe the surface of the stirring paddle directly to see if there are obvious signs of wear, scratches, deformation or cracks. Pay special attention to the edges, corners a
Read More -
02
Dec
How to judge whether the dye mixer needs maintenance?1. Running time: Short-term operation: For the newly installed dye mixer, it is necessary to pay close attention to its operation status in the first few weeks of operation, and perform some basic ins
Read More -
29
Nov
What issues should be paid attention to when installing the stock solution pr...Preparation work before installation 1. Site preparation: Select a suitable installation site, ensure that the ground is flat and solid, and there is enough space for the equipment to run and operate,
Read More -
27
Nov
How to solve the problem of increased equipment wear caused by unstable stirr...Find out the reasons for unstable stirring speed: 1. Electrical system failure: Check whether the power supply voltage and current of the motor are stable, whether there are problems such as phase los
Read More -
25
Nov
What adverse effects may unstable stirring speed have on the stock solution p...1. Affecting the mixing effect Leading to uneven mixing of materials: Unstable stirring speed will cause the stirring paddle to have inconsistent effects on the materials. The materials in some areas
Read More -
22
Nov
How to judge whether the stirring speed of the stock solution preparation sys...1. Observe the rotation of the stirring shaft: During the operation of the stock solution preparation system, directly observe the rotation of the stirring shaft. If the stirring shaft rotates smoothl
Read More -
20
Nov
What factors may cause the unstable stirring speed of the stock solution prep...1. Power supply problem Unstable power supply voltage: When the actual voltage deviates greatly from the rated voltage, such as grid voltage fluctuations, aging of the power supply line or poor contac
Read More -
18
Nov
How to eliminate the electrical fault of the stock solution preparation system?1. Analysis of fault phenomenon: 1. Not working: Power supply problem: Check whether the plug and socket are properly plugged in, whether the power cord is damaged, whether the circuit breaker is trip
Read More -
15
Nov
What are the common faults of stock solution preparation system?1. Mechanical failure 1. Motor failure: The motor is one of the core components of the stock solution preparation system. If the motor fails, the mixer may not operate normally. Common motor failures
Read More




