Continuous Hot Melt Dyeing Base Sample Machine

The Continuous Hot Melt Dyeing Base Sample Machine simulates the entire dyeing process in a dyeing workshop. Sample fabrics pass sequentially through the dyeing machine, undergo infrared penetration treatment, and are dried in a preheating chamber. Optional features include baking and automatic demolding for automated fabric laying. Production repeatability is excellent.

The sample fabrics are secured with clamps, allowing for simultaneous testing of a large number of fabric samples without long waiting times, resulting in high efficiency.

1. The rollers are made of high-precision nitrile rubber, with a length of 300 and a diameter of ￠126 mm.
2. The large-section film cylinder has strong resistance to friction with the guide rail, automatically resets when power is cut off, without left or right deviation, and has high reproducibility.
3. Roller pressure: 0.03 - 0.8 Mpa, pressure is stable, and adjustment is convenient.
4. It is equipped with a set of four liquid tanks, each with 150 CC, for convenient conversion.
5. It is equipped with a safety foot switch.
6. Power: Voltage input is 380V/50Hz. It is equipped with a reduction gearbox and a 370W three-phase motor.

1. The infrared penetration is composed of 12 400W infrared heating tubes, providing uniform heat output and high heating efficiency.
2. The infrared operation is divided into full load and half load.
3. The input voltage is 220V/50Hz.

1. The hot air circulation is controlled by a temperature control table, with a control accuracy of ±1 - 2℃.
2. The pre-heating working temperature is 20℃ - 150℃.
3. The baking working temperature is 20℃ - 240℃.
4. The heating power is 9KW, with a fast heating speed.
5. Both pre-heating and baking can be automatically unclamped and laid down, which is reliable and safe.
6. The power of the pre-heating and baking fans is 0.75KW. It directly controls the heating speed and is variable frequency speed regulation.
7. The motor and control part are all made of high-quality components, with reliable performance and long durability.

1. It is made of high-quality SUS304 sheet.
2. It is equipped with a set of control box.
3. The main drive is a stainless steel chain and clips. The motor is variable frequency speed regulation, adjustable at will. The operation is convenient. The power is 0.75KW.
4. It is equipped with a spray gun and an air gun with compressed air for each.
5. The total machine power is 25KW, with a voltage input of 380V/50Hz.
6. The total machine weight is approximately 2500 kg.
7. Dimensions: 3400 mm (length) × 1300 mm (width) × 3300 mm (height).

Hot Tags: continuous hot melt dyeing base sample machine, China continuous hot melt dyeing base sample machine manufacturers, suppliers, factory, laboratory sample dyeing level, laboratory sample dyeing machine, laboratory sample dyeing mixture, laboratory sample dyeing option, laboratory sample dyeing sector, quality laboratory sample dyeing machine