Knowledge
-
17
Oct
How to Clean and Maintain a High-Temperature Sample Dyeing Machine?I. Daily Cleaning External Cleaning Wipe the machine body with a soft cloth after each day's work, avoiding moisture penetration into the electrical components. Gently wipe the control panel with
Read More -
13
Oct
How to Properly Use a High-Temperature Sample Dyeing Machine?I. Pre-operation Preparation 1. Equipment Inspection Confirm that the dyeing cup sealing ring is intact (Teflon + silicone double-layer design), and check the temperature control system, heating power
Read More -
10
Oct
How can J-type dyeing machines prevent head cracking?1. Material Optimization Select corrosion-resistant materials: 316L stainless steel is preferred over 321 stainless steel, as it offers greater resistance to chloride ion corrosion and significantly r
Read More -
08
Oct
What are the main faults of the J-type dyeing machine?1. Head Cracking (Stress Corrosion and Fatigue Cracks) Cause: Excessive chloride ion concentration in the dye liquor (e.g., Na₂SO₄ decomposition produces Cl⁻), causing stress corrosion. Fatigue cracks
Read More -
06
Oct
What is the maintenance cycle for the J-type dyeing machine?1. Daily Maintenance (Daily/Per Shift) Cleaning: Wipe the machine surface and exposed parts (such as the cloth lifting wheel and nozzle) to remove any residual dye or fiber. Inspection: Before startin
Read More -
03
Oct
How to Install a Cleaned Mini Dehydrator Filter1. Pre-Installation Preparation Power Off: Make sure the dehydrator is unplugged to avoid the risk of electric shock. Inspect the Filter: Verify that the filter is completely dry and free of residual
Read More -
01
Oct
How do I tell if the Mini Dehydrator filter needs cleaning?1. Observe the filter surface. Dust accumulation: If dust, black impurities, or fiber clumps are noticeably accumulated on the filter surface, it indicates clogging and needs cleaning. Dirt adhesion:
Read More -
29
Sep
How do I clean the filter on a mini dehydrator?1. Preparation Power off: Make sure the dehydrator is unplugged to avoid the risk of electric shock. Tools: A toothbrush, soft-bristled brush, clean water, a towel, or a basin (for collecting water).
Read More -
26
Sep
Mini Dehydrator Common Problems and Solutions1. Incomplete Spin Possible Causes: Overloading or uneven distribution of laundry, resulting in insufficient centrifugal force. Speed setting too low (e.g., below 800 rpm). Drain pipe clogged or fil
Read More -
24
Sep
Common Faults of O-Type Dyeing Machines1. Stress Corrosion Symptoms: Under high-temperature and high-pressure environments, temperature fluctuations in the dye solution can cause cracks or perforations in metal parts of the equipment (such
Read More -
22
Sep
Key Points for O-type Dyeing Machine Maintenance1. Daily Maintenance Clean the stainless steel interior, robotic arm, and control panel to prevent dye residue. Weekly check the oven wax tray, filter, and safety valves (such as the cylinder safety v
Read More -
19
Sep
O-Type Dyeing Machine Operation Procedure1. Pre-Startup Inspections Confirm that the power supply, steam (5-10 kg/cm²), water pressure (1-2 kg/cm²), and air pressure (7-9 kg/cm²) are normal. Check the nozzle gap for unif
Read More




