Knowledge
-
17
Sep
How to properly use a Sand Sample Dyeing Machine?I. Equipment Preparation 1. Checking Equipment Status Confirm that the power supply, temperature control system, and agitator of the Sand Sample Dyeing Machine (such as the DM-3-24P all-st
Read More -
15
Sep
How to prevent nozzle clogging in a room temperature dyeing machine?I. Nozzle Design and Optimization 1. Use a Large-Channel Nozzle Choosing an open-channel design (such as an MFP, FullJet®, or SpiralJet® nozzle) reduces the risk of clogging with high-viscosit
Read More -
12
Sep
What are some common malfunctions with the Room Temperature Dyeing Machine?1. Dye Circulation System Malfunction 1. Clogged Nozzle or Obstructed Air Duct Symptom: Reduced dye circulation efficiency, resulting in color shifts or fabric damage. Cause: Dye particle accumulation
Read More -
10
Sep
How to determine the failure rate of a Room Temperature Dyeing Machine?1. Core Failure Indicator Analysis Power System Stability When the power supply voltage fluctuates by more than ±10% or the harmonic distortion exceeds 5%, the PLC module failure rate increases
Read More -
08
Sep
How to improve the dyeing quality of O-type dyeing machines?1. Ultra-low liquor ratio precision Lock the liquor ratio within the 1:2.5-1:4 range, and immediately correct any deviation greater than ±0.2. Use a closed-loop water supply system with a flow
Read More -
05
Sep
How difficult is it to operate an O-type dyeing machine?1. Hardware: Low Entry • Full-process PLC + touch screen: Just like using a mobile phone, select the process and start heating, spraying, circulation pump, fabric manipulation, and fabric dischar
Read More -
03
Sep
How much maintenance does a Mini tenter require?1. 10 minutes after each shift • Needle Plate/Clipper Chain: Use compressed air or a brush to blow away scraps of cloth and yarn to prevent chain jams. • Filter: Remove the oven air inlet fi
Read More -
01
Sep
How to prevent cross-contamination with an automatic dripping machine?1. Independent Dyeing Chambers/Disposable Consumables • Each slice or piece of fabric is placed in a separate chamber; dye and nozzles are disposable, preventing backflow and sharing. • Spra
Read More -
29
Aug
How should the automatic dripping machine be maintained and cleaned?1. Daily 10-minute quick maintenance after the shift Drip nozzle flushing: Rinse the dripper/sucker nozzle with deionized water or 70% ethanol to prevent dye crystallization; disposable suckers should
Read More -
27
Aug
What precautions should be taken when operating an automatic dripping machine?1. Equipment Inspection Before use, inspect the equipment to ensure all components are in place and the electrical connections are correct. Check the volume of the titrant to ensure it is at least 5ml
Read More -
25
Aug
How to operate an automatic dripping machine?1. Preparation Equipment Inspection: Ensure the equipment is in good working condition and check the storage and expiration dates of the staining reagents. Personal Protection: Operators should wash t
Read More -
22
Aug
How does the automatic dripping machine ensure consistent and efficient stain...Technical Principle 1. Independent Drip Technology: Each sample is stained in a separate staining chamber, preventing cross-contamination between samples. This independent dripping technology precisel
Read More




