How often should an automatic drip dispensing machine be maintained?

Jan 09, 2026 Leave a message

I. Basic Maintenance Cycle

Routine Maintenance: Perform flushing and sealing operations every 4 to 6 weeks to prevent tubing blockage and infection.

Long-Term Storage: If not used for more than one month, calibration and bubble/pressure alarm tests are required.

II. Key Maintenance Contents

1. Cleaning and Inspection: Regularly clean the internal and external surfaces of the instrument, avoiding the use of corrosive cleaning agents.

Inspect seals and pipe connections to ensure there are no leaks.

2. Component Maintenance: Check the operation of key components such as the motor, pump, and valves, and repair or replace worn parts promptly.

Regularly check the CNC pump tubing for adhesion or wear, especially when the liquid flow rate decreases.

3. Power Supply and Waterproofing: Use a stable power supply and avoid excessive pulling when plugging and unplugging the power cord.

Ensure good contact between the power cord plug and socket, and proper grounding.

The instrument is not waterproof; avoid contact with water.

III. Operation Example Reference

Infusion Pump Maintenance: Perform maintenance at least once a month, cleaning the casing and pump body.

Clean the pump body and surrounding area promptly during operation to prevent corrosion from the medication.

After long-term storage, the alarm function needs to be calibrated and tested.

Automatic Dripping Machine

Send Inquiry

whatsapp

Phone

E-mail

Inquiry