1. Pretreatment of fabrics
Before normal temperature dyeing, fabrics usually need to go through a series of pretreatment processes to ensure the dyeing effect and quality:
Removing impurities: Fabrics will be contaminated with various impurities during the textile processing, such as sizing, oil, dirt, etc. These impurities will affect the dyeing effect, so they need to be removed by chemical and physical mechanical action.
Singeing: Singeing is the process of removing the fluff on the surface of the fabric, which can improve the gloss of the fabric, improve the finish, and reduce the hair loss in subsequent processing.
Desizing: Desizing is to remove the sizing on the warp yarn during weaving. For thick fabrics or stretch fabrics, the cold pile desizing method is recommended.
Bleaching: Bleaching can make the fabric reach the required whiteness, usually using hydrogen peroxide for bleaching.
Mercerizing: Mercerizing can make the fabric have better gloss and dimensional stability, but it is necessary to pay attention to controlling the width to avoid affecting subsequent dyeing and finishing.
2. Fabric properties
Fiber type: Normal temperature dyeing machines are suitable for a variety of fiber types, including natural fibers (such as cotton, linen, silk, wool) and synthetic fibers (such as polyester, acrylic, nylon).
Fabric thickness and weight: Different types of normal temperature dyeing machines have different adaptability ranges for fabric thickness and weight. For example, some models of normal temperature dyeing machines are suitable for thick and thin fabrics.
Fabric hygroscopicity: Fabrics need to have good hygroscopic properties so that dyes can penetrate and combine evenly.
3. Precautions during dyeing
Dye selection: Select appropriate dyes according to the fiber type and dyeing requirements of the fabric. For example, reactive dyes are suitable for cotton fibers, while disperse dyes are suitable for polyester.
Dyeing temperature and time: Although normal temperature dyeing machines work at room temperature, some dyes may require specific temperature and time conditions to ensure the dyeing effect.
pH control: The pH value of the dye solution needs to be controlled during the dyeing process to ensure the stability of the dye and the dyeing effect.
4. Post-processing
Setting: Dyed fabrics may need setting treatment to achieve the desired dimensional stability and feel.
Pre-shrinking: For fabrics such as stretch fabrics, pre-shrinking treatment is required to reduce shrinkage in subsequent use.





