1. Safety training: Dyeing workers must undergo safety training and pass the examination before taking up their posts.
2. Labor protection wear: Labor protection wear must be neat and meet the requirements when working.
3. Equipment inspection: Check the equipment condition before work every day to ensure that there are no safety hazards in the equipment.
4. Operation of steam heating water: Open the control valve too quickly, and cover the cylinder cover to prevent scalding from boiling water.
5. Hanging dyeing operation: When doing hanging dyeing, all parts of the body cannot be extended under the hanger to prevent the hanger from falling off and injuring people.
6. Steamer operation: If you operate a steamer, it must be operated by personnel who have obtained a special equipment operation license and strictly in accordance with the requirements of the steamer operation procedures.
7. Chemical management: All dyes and auxiliaries must be used in accordance with the principles of fixed personnel, fixed time and fixed quantity, and prevent burns when putting them into the cylinder.
8. Keep the passage unobstructed: Keep the fire passage unobstructed, it is strictly forbidden to block the passage, and clear the ground water at any time to prevent falls.
9. Cleaning up after work: Water, electricity and steam must be cut off and equipment must be cleaned up after work each day.





