Daily maintenance points:
1. Equipment cleaning: After each use, clean up the debris, dust and oil stains around the rolling mill in time to prevent them from entering the equipment and affecting normal operation. For example, during the rolling process, metal debris and oil stains may adhere to the rollers and other parts. If they are not cleaned in time, it may cause the parts to wear more severely.
2. Check the connection of each component: Regularly check whether the connecting bolts, nuts, etc. between the various components of the rolling mill are loose. If they are loose, they should be tightened in time. Because the equipment will vibrate during operation, it may cause the connection parts to loosen, affecting the stability and rolling accuracy of the equipment.
3. Lubrication system maintenance:
Check the oil tank level: Make sure that the lubricating oil level in the oil tank is within the normal range. Too low oil level may cause insufficient lubrication and affect the life of the equipment.
Regularly change the lubricating oil: According to the frequency of use of the equipment and the working environment, change the lubricating oil at the prescribed time interval to ensure the good performance of the lubricating oil.
Check the lubrication pipeline: Check whether the lubrication pipeline is unobstructed, whether there is any blockage or leakage, and if there is any problem, it should be handled in time.
4. Cooling system inspection:
Check the cooling water pipeline: Ensure that there is no leakage or blockage in the cooling water pipeline to ensure the cooling effect. For example, if the cooling water pipeline is blocked, the roller temperature may be too high, affecting the rolling quality and equipment life.
Check the cooling water pump: Check whether the working status of the cooling water pump is normal, including whether the pressure, flow and other parameters of the water pump meet the requirements.
5. Electrical system inspection:
Check the electrical control cabinet: Check whether the electrical components in the electrical control cabinet are normal, whether there are abnormal phenomena such as overheating and odor, if there are any problems, the cause should be promptly investigated and repaired.
Check the motor: Regularly check the operating status of the motor, including whether the temperature, vibration, noise, etc. of the motor are normal, and check whether the wiring of the motor is firm.
Clean electrical equipment: Regularly clean the dust and debris on the surface of electrical equipment to prevent excessive dust accumulation from affecting heat dissipation and electrical performance.
Main points for regular maintenance:
1. Roller inspection and replacement:
Check the surface of the roller: Regularly check the wear of the surface of the roller. If the surface of the roller is found to have defects such as wear, cracks, peeling, etc., it should be repaired or replaced in time. Because the quality of the roller surface directly affects the quality of the rolled product.
Measure the roller size: Use professional tools to regularly measure the diameter, length and other dimensions of the roller to ensure that the roller size meets the requirements. If the roller size exceeds the tolerance range, the dimensional accuracy of the rolled product may not meet the standard.
Replace the roller: According to the service life and wear of the roller, replace the roller at the specified time interval or rolling tonnage.
2. Bearing inspection and maintenance:
Check the bearing wear: Regularly check the bearing wear, check whether the inner and outer rings, rolling elements, etc. of the bearing have defects such as wear, cracks, pitting, etc. If there are any problems, the bearing should be replaced in time.
Cleaning the bearing: Clean the bearing regularly to remove oil, impurities, etc. in the bearing, and check the lubrication of the bearing to ensure that the bearing is well lubricated.
Check the bearing clearance: Check whether the clearance between the bearing and the shaft neck, bearing seat, etc. meets the requirements. If the clearance is too large or too small, it may affect the normal operation of the bearing and the stability of the equipment.
3. Reducer maintenance:
Check the gears of the reducer: Check the wear of the gears in the reducer regularly, including the wear of the tooth surface, the change of the tooth shape, etc. If there is any problem, the gears should be repaired or replaced in time.
Check the lubrication of the reducer: Ensure that the lubricating oil in the reducer is sufficient and the oil quality is good, and check whether the lubrication pipeline is unobstructed.
Check the sealing of the reducer: Check whether there is leakage in the sealing part of the reducer. If there is leakage, the seal should be replaced in time.
4. Maintenance of other parts:
Check the coupling: Check the connection of the coupling regularly, including whether the bolts of the coupling are loose, whether the elastic elements are damaged, etc. If there is any problem, it should be handled in time.
Check the guide rails and sliders: Check the wear of the guide rails and sliders to ensure that the matching accuracy of the guide rails and sliders meets the requirements. If the wear is serious, it should be replaced in time.
Check the hydraulic cylinder and pneumatic components: For the Horizontal Padding Mangle equipped with hydraulic cylinders and pneumatic components, regularly check the working status of the hydraulic cylinders and pneumatic components, including the sealing of the hydraulic cylinders and the sensitivity of the pneumatic components. If there is any problem, it should be repaired or replaced in time.
Key points of fault maintenance:
1. Establish fault record files: Record each fault in detail, including the time, phenomenon, cause, maintenance method and maintenance results of the fault, so as to facilitate future review and analysis, summarize experience and lessons, and prevent similar faults from happening again.
2. Quickly and accurately determine the cause of the fault: When the equipment fails, the maintenance personnel should quickly and accurately determine the cause of the fault based on the fault phenomenon, combined with the structure, working principle and previous maintenance experience of the equipment. For example, if the rolling mill vibrates abnormally during the rolling process, it may be caused by roller imbalance, bearing damage, loose coupling and other reasons.
3. Take the correct maintenance method: Take the corresponding maintenance method according to the cause of the fault. For some simple faults, such as loose bolts and blocked oil pipes, they can be repaired on site; for some complex faults, such as gear damage and severe bearing wear, parts may need to be replaced or returned to the factory for repair.
4. Debugging and acceptance after maintenance: After completing the fault maintenance, the equipment should be debugged to check whether the various performance indicators of the equipment have returned to normal, such as rolling accuracy, speed, stability, etc. Only when all performance indicators of the equipment meet the requirements can it be officially put into use.
What are the key points of maintenance and care of Horizontal Padding Mangle?
Oct 25, 2024 Leave a message
Send Inquiry




