I. Daily Maintenance
1. Cleaning and Inspection
After each use, clean the stainless steel inner surface, robotic arm, and control panel to prevent residual dye solution from corroding the components.
Check the R-shaped area of the machine head for cracks or dye crystal buildup. Promptly clean any grayish-white crystalline deposits to prevent stress corrosion.
2. Lubrication and Sealing
Regularly lubricate the gears of the transmission device with industrial gear oil, replacing it monthly to prevent wear from impurities.
Check the integrity of the seals; replace damaged seals immediately to prevent dye leakage and equipment corrosion.
II. Periodic Maintenance
1. Weekly Inspection
Clean the wax tray at the bottom of the oven and check that all components are functioning correctly, ensuring there is no dye buildup.
Use an ultrasonic thickness gauge to check the wall thickness of the machine head and identify any abnormal thinning.
2. Quarterly Comprehensive Inspection
Conduct a pressure test on the entire machine, calibrate the safety valve, and focus on checking for fatigue cracks in stress concentration areas (such as the R-shaped area of the machine head).
Assess material corrosion through metallographic examination or non-destructive testing (such as ultrasound), especially in areas with high chloride ion concentration.
III. Special Precautions
Chloride Ion Management: The chloride ion concentration in the dye solution should be controlled within a safe range (recommended ≤5000mg/L). Regularly flush the pipelines to prevent pitting corrosion and accelerated cracking.
Temperature and Pressure Monitoring: Ensure that the operating temperature is ≤100℃ and the pressure is ≤0.3MPa. Operating beyond these limits can easily lead to material fatigue.





