1. Inspect the Circumferential Cracks at the Rear (R) Area of the Dye Head
This is a common malfunction in J-type dyeing machines and requires regular macroscopic inspection. Pay close attention to the rear (R) area for circumferential cracks, dye liquor leakage, and grayish-white crystalline deposits. If cracks are found, the machine must be stopped immediately.
2. Nozzle Gap and Filter Maintenance
Improper nozzle gaps can lead to uneven dye liquor spraying, causing color spots and uneven dyeing. The nozzle gaps should be checked and adjusted regularly to ensure they match the fabric weight. Simultaneously, the filter screen should be cleaned regularly to prevent clogging that could affect dye liquor circulation and dyeing uniformity.
3. Detection of Chloride Ion Concentration in Dye Liquor
High concentrations of chloride ions in the dye liquor (e.g., 11700 mg/L) can accelerate pitting and stress corrosion cracking of the stainless steel dye head. The dye liquor composition should be tested regularly to control the chloride ion concentration. Consider using materials resistant to chloride ion corrosion or pre-treating the dye liquor.
4. Safety Interlock Valve Effectiveness Check
Safety interlock valves are critical safety devices preventing accidental opening of equipment under pressure or high temperature. Their trigger response time (should be <0.3s) and sealing performance must be checked regularly to ensure effective power cut-off in abnormal situations.
Implementation Requirements:
Establish an electronic record for the entire equipment lifecycle.
Annual inspections must be conducted by a certified inspection agency.
Abnormal data must be uploaded to the monitoring platform in real time.
Operators must be 100% certified and undergo refresher training every two years.





