How to optimize the nozzle pressure of a J-type dyeing machine?

Jan 05, 2026 Leave a message

Key operational points:

1. Main pump flow control: Set the main pump flow rate within 80%-100% of its rated range using a frequency converter. This is fundamental to stabilizing nozzle pressure.

2. Nozzle pressure adjustment: While ensuring the main pump flow rate, stabilize the nozzle pressure at 0.3-0.4 MPa using a regulating valve. Pressure below 0.25 MPa will lead to insufficient dye liquor exchange, easily causing problems such as uneven coloring and incomplete bleaching.

3. Fabric weight matching: Adjust the nozzle diameter or gap according to the fabric weight. For example, for lightweight fabrics (40-160 g/m²), a nozzle diameter of 80-100 mm is recommended; for medium-weight fabrics (160-230 g/m²), 60-80 mm is recommended; and for heavy fabrics (above 230 g/m²), 100-130 mm is required.

4. Process Monitoring: Closely observe the fabric speed and dye liquor exchange to ensure the fabric running speed is synchronized with the fan adjustment, avoiding fabric blockage or pressure.

Maintenance Tips:

1. Regularly check nozzles for blockage and clean them promptly.

2. Inspect the main pump, pipelines, and seals to ensure there are no leaks.

3. Adjust nozzle pressure parameters flexibly according to fabric type and process requirements.

How to remove rust stains from a J-type dyeing machine?

Send Inquiry

whatsapp

Phone

E-mail

Inquiry