I. Core Performance Indicator Testing
Temperature Control Accuracy
For high-quality equipment, temperature fluctuations should be controlled within ±1℃, and high-precision models can reach ±0.1℃.
The temperature distribution in the working area needs to be verified through multi-point temperature measurement, with a temperature difference not exceeding 1.5℃.
Dyeing Uniformity Verification
Measure the ΔE value using a colorimeter (ΔE < 1.5 is acceptable), and visually inspect the penetration uniformity of multi-layer fabric samples.
A leveling factor (LDF value) > 70 indicates good performance, and should be evaluated in conjunction with the dye migration rate (MI value ≥ 75%).
II. Mechanical Structure Assessment
Airflow/Liquid Flow System
For airflow dyeing machines, check the diameter of the air duct (200-300mm) and the injection pressure (0.05-0.15MPa).
For overflow dyeing machines, verify the cross-sectional area of the overflow pipe (rectangular pipe is 1/3 larger than elliptical pipe) and the spreading length (6-7m).
Fabric Running Stability
Rope dyeing machines need to avoid mechanical friction, and overflow machines need to test the matching of the fabric lifting roller speed (10-20m/min) with the liquid level height.
III. Process Adaptability Testing
Bath Ratio and Energy Consumption
Low bath ratio models (1:5-1:8) are more energy-efficient; the dye solution concentration control error (±0.5%) needs to be verified.
Compare unit energy consumption (e.g., steam consumption < 0.8kg/kg water evaporation is considered advanced).
Dye Compatibility
Test the dyeing effect of different dyes such as reactive dyes (60℃) and disperse dyes (polyester 125-130℃).
IV. Quality Certification and Compliance
Must comply with the requirements of the "Printing and Dyeing Industry Standards (2023 Edition)," such as prohibiting outdated processes and equipping with waste heat recovery devices.
The test report should include physical and chemical indicators such as peeling strength and color fastness (wash/friction/sweat resistance). V. Manufacturer Service Capabilities
Prioritize manufacturers that provide even dyeing test reports (such as SGS testing) and support 7-day no-questions-asked returns.





