1. Fabric Guide Strips (Fabric Lifting Wheel Strips): Standard EPDM material strips will harden and crack within 3-6 months at 130℃. Fluorosilicone modified strips have a lifespan of approximately 18 months. Failure to maintain this lifespan will cause fabric abrasion and uneven dyeing, requiring regular replacement.
2. Drive Belts/V-Belts: Long-term tension and friction will gradually reduce their tension, leading to slippage and unstable transmission. Regular inspection and replacement are necessary.
3. Seals/Sealing Rings: Prolonged exposure to high-temperature dye solutions will cause gradual aging. Replacement intervals should not exceed one year to prevent leaks and insufficient pressure.
4. Lubricating Oil/Grease: The lubricating oil inside the equipment has a lifespan of approximately 6 months and needs regular replacement to ensure smooth operation of transmission components.
5. Filter Screens: Clean monthly. Replace immediately if damaged or clogged beyond repair to prevent impurities from entering the dye solution and affecting the dyeing effect.
6. Wear-prone tools/squeegees: The squeegee for printing must be replaced when the wear exceeds 0.5mm to ensure even scraping and avoid printing defects.





