What should I pay attention to when operating the Sand Sample Dyeing Machine?

Jul 02, 2025 Leave a message

1. Preparation before operation
Be familiar with the performance of the equipment: Operators must undergo special training and be familiar with the performance, purpose and operating precautions of the equipment.
Check the status of the equipment: Check the temperature sensor error of the Sand Sample Dyeing Machine (calibrated with a standard thermometer every week, deviation ≤±0.5℃), ensure that the dye cup is well sealed, and the stirring paddle speed is normal (20-30r/min).
Clean the equipment: After each use, the dye cup needs to be soaked in hydrochloric acid (5%) for 1 hour, and then rinsed with deionized water to pH=7; the barrel needs to be dedicated and clearly labeled to avoid cross contamination.
2. Precautions during operation
Wear protective equipment: Operators should wear chemical safety glasses, acid-proof and alkali-proof plastic work clothes, and rubber acid-proof and alkali-resistant gloves.
Closed operation: The operation should be carried out in a closed environment, and ventilation should be strengthened to prevent dye vapor from leaking into the workplace air.
Avoid contact with taboos: During operation, dyes should be avoided from contact with oxidants and alkalis.
Load and unload gently: When carrying dyes or dye cups, load and unload gently to prevent damage to packaging and containers.
Control temperature and time: Strictly control temperature and time according to experimental requirements to ensure dyeing effect. For example, the heating rate of large-scale dyeing machines is usually 1-1.5℃/min, and small prototypes need to be simulated by step-by-step heating settings.
Avoid overload: Pay attention to the electrical load of the ammeter to prevent the machine from overloading and causing the machine to jump or the sanding belt to crack.
3. Precautions after operation
Clean the equipment: After work, clean the inside of the machine. It is recommended to loosen the sanding belt to avoid long-term tension and relaxation.
Maintain equipment: Regularly check the temperature sensor, dye cup sealing and stirring paddle speed of the equipment to ensure that the equipment is in good condition.
4. Safety and emergency
Equip emergency equipment: The workplace should be equipped with corresponding types and quantities of fire-fighting equipment and leakage emergency treatment equipment.
Emergency handling: In case of emergency, the machine should be shut down immediately and the power should be cut off. If necessary, use a self-contained breathing apparatus.

How does the J-type dyeing machine reduce dyeing costs?

Send Inquiry

whatsapp

Phone

E-mail

Inquiry