Universal steel beam for rolling mill

universal
It consists of a pair of horizontal rollers and vertical rollers, all of which are driven by power. Used for rolling slabs or flat steel.
Universal steel beam
The structure is similar to the universal rolling mill, except that the axes of the vertical roller and the horizontal roller are placed in the same vertical plane, and the vertical roller is driven. Suitable for rolling wide-edge steel beams with a height of 300 to 1200 mm.
Disc punching machine
The axis of the rolled piece is lower than the axis of the disc. When the disc rotates, the rolled piece spirals forward against the mandrel, and the solid round steel is rolled into a hollow blank tube. It is suitable for rolling 60-150 seamless steel pipes. There is also a cross-rolling piercing machine, whose drum-shaped rollers are obliquely intersecting and rotating. The working principle is similar to that of the disc-type piercing machine, and it is suitable for rolling seamless steel pipes of 60 to 650 gauge. The cross-rolling and piercing machine is matched with the automatic pipe rolling machine, leveling mill, sizing (reducing) machine and skew roller straightening machine in Figure 7 to form a seamless steel pipe hot rolling unit.
Tires
The inner and outer circles of the tire are rolled by a pair of opposing rollers, and the two end faces of the tire are rolled by a pair of inclined tapered rollers. For rolling inner and outer rings of wheels or rolling bearings.
round ball
The ball rolling mill has rollers with spiral semicircular grooves. The bar material spirals forward between the rotating rollers and is rolled into balls. It can roll balls with a diameter of 60 to 650 mm.