Due to the harsh working environment of the rolling mill, during the working process, the rolling cooling water quickly atomizes when encountering the red-hot steel billet, entraining the iron oxide powder that falls off the surface of the steel billet and sprays it around. The roller passes through the bearing seat and causes serious damage to the frame arch. The large impact causes corrosion and wear to varying degrees on the inner window surface of the rolling mill frame arch and the bottom surface of the frame arch, making it difficult to effectively control and manage the gap between the rolling mill frame and the roll chock. Gaps between the rolling mill frame and the roll chock often appear. The phenomenon of exceeding management limits. The increase in the gap between the rolling mill arches worsens the working conditions of the main transmission system of the rolling mill, causing the main transmission to vibrate and impact greatly. It is easy to slip when the steel ingot bites in, affecting the control of the plate shape and having a great impact on product quality.
Most of the rolling mill arches are made of ordinary steel castings. During long-term service, the window surface is susceptible to corrosion and wear, resulting in deterioration of working conditions. The online machining method is usually used to repair the archway, that is, the material is removed through mechanical processing, the damaged layer on the surface of the archway is removed, and the contact surface is leveled. The enlarged size is compensated by increasing the thickness of the lining board. This repair method is simple and convenient to operate, but it does not change the properties of the archway surface. After a period of use, the archway surface will be corroded and worn out and become ineffective. Moreover, multiple machining operations will have an adverse effect on the strength and stiffness of the archway. Considering the sensitivity of the rolling mill to stiffness and the limited margin available for machining, this repair method can only be a stopgap measure. Manual arc welding can be used to restore the enlarged size of the material removed after machining, but large-area arc surfacing on such a rigid structure may cause deformation of the arch structure. If the structure is distorted and deformed, it will be fatal and cannot be corrected. This is something that is never allowed to happen in factory production. Therefore, this repair method will bring greater risks and is generally not used.
Today, polymer composite materials can be used to solve the wear and tear of rolling mill arches. The polymer composite repair material has excellent adhesion, can be firmly attached to the surface of the metal substrate, and will not fall off after long-term work; the product itself has extremely high compressive strength, even under the rolling force of up to 1900 tons, the material It will not be damaged; the unique polymer structure gives the material good impact resistance, which can absorb the impact of the bearing seat on the arch and avoid wear; at the same time, the product has good corrosion resistance and can protect the surface of the arch from cooling water. of erosion. The use of special materials to repair rolling mill archway wear does not require material removal, does not affect the overall strength and stiffness of the archway, and does not cause deformation caused by thermal stress of repair welding. It has solved the problem that the company has been unable to solve for many years.
Rolling mill breakdown maintenance
Jan 09, 2024 Leave a message
Send Inquiry




