1. Preparation before starting:
Check whether the parts and fasteners of each part of the equipment are loose.
Clean the inside and outside of the equipment to ensure that there is no residue.
Add appropriate amount of water and dye to ensure that the dye liquor reaches the predetermined bath ratio.
2. Start the equipment:
Turn on the power, start the circulation pump, and ensure that the dye liquor circulates.
Adjust the temperature and circulation speed of the dye liquor as needed.
3. Dyeing process:
Put the fabric into the dye tank to ensure that the fabric is completely immersed in the dye liquor.
Circulate the fabric through the overflow device to ensure uniform dyeing.
4. Dyeing is completed:
After reaching the predetermined dyeing time, turn off the circulation pump.
Take out the fabric for subsequent processing.
5. Equipment cleaning:
After dyeing is completed, clean the dye tank, circulation pump and pipeline to ensure that the equipment is clean.





