Operation Difficulty Analysis
1. Equipment Type Influence:
Overflow dyeing machine: High degree of automation, relatively easy to operate, suitable for beginners. The fabric is in a relaxed state during the dyeing process, with less tension, uniform dyeing, and soft feel.
Jet dyeing machine: The operation requirements are high, and suitable nozzles need to be selected according to fabrics of different specifications, otherwise it is easy to cause cloth blocking.
Jigger dyeing machine: The operation is relatively complicated, and the speed and tension of the cloth roller need to be adjusted. It is suitable for operators with certain experience.
2. Process requirements influence:
Temperature control: Temperature control is very important during the dyeing process, and the heating rate cannot be too fast, otherwise it may cause uneven penetration of the dye.
Dye addition and mixing: The dye needs to be fully dissolved and mixed evenly with the dye solution, otherwise it will affect the dyeing effect.
Fabric treatment: The fabric needs to be pretreated before being placed in the dyeing machine to ensure that the surface is clean and free of impurities.
Operation skills
1. Temperature control: Do not set the temperature heating curve too fast, and do not cool it down too fast. Heating too fast may cause uneven penetration of dyes, while cooling too fast may affect the fastness of dyeing.
2. Fabric processing: Before dyeing, make sure that the surface of the fabric is clean and free of impurities to avoid affecting the dyeing effect. When the fabric is placed in the dyeing machine, it should be evenly distributed to avoid uneven dyeing due to local excessive thickness or thinness.
3. Dye addition and mixing: After the dye is added, make sure that it is fully mixed with the dye solution. You can use a stirrer or the stirring function of the dyeing machine to mix it.
4. Adjustment of pressure and speed: Adjust the speed of the guide wheel and the main pump according to the material and dyeing requirements of the fabric. Thick fabrics can reduce the speed appropriately, while thin fabrics can increase the speed.
Precautions for use
1. Equipment inspection: Check whether the dyeing machine is in normal working condition before use and confirm that the power connection of the equipment is normal.
2. Cleanliness and sanitation: Check whether there is any residual dye or other debris inside the dyeing machine to ensure cleanliness and sanitation.
3. Safe operation: When cutting samples, the temperature in the cylinder must be reduced to below 80℃ and there is no pressure to prevent personal injury.
4. Avoid mechanical failure: Do not start the main pump when there is no water in the cylinder to avoid wear of mechanical seals and bearings.





