How to regularly maintain and service the fabric dyeing machine?

Dec 27, 2024 Leave a message

1. Daily inspection and maintenance:
Check all parts of the dyeing machine every day, including whether the fasteners are tightened and whether there are any abnormalities.
Check whether the safety valve, thermometer and pressure gauge are normal, refer to the "Temperature and Saturated Steam Pressure Constant Comparison Table", if there is any discrepancy, it must be checked and corrected immediately.
Maintain the sealing of the dyeing machine, and replace the sealing ring (gasket) in time if leakage is found.
2. Regular lubrication:
The running parts, friction parts and bearings of the machine need to be lubricated regularly.
3. Cleaning work:
Use detergent to clean the inner surface of stainless steel and rinse with water, and wipe the surface of the robot arm and the control panel with a damp cloth.
Take out the rinse container and clean it with detergent, and use warm water and detergent to clean the reagent container.
4. Monthly maintenance:
Check whether the flange connection parts of the dyeing equipment machine are sealed intact.
Check whether each valve on the machine is flexible to open and close and the seal is leak-free.
Check the mechanical seal of the main pump, and no leakage is allowed during operation.
5. Half-year maintenance:
Stop the machine every six months for a comprehensive inspection to find and solve problems in time.
6. Annual maintenance:
The dyeing machine is maintained once a year, the main device components are repaired and maintained once, and the wearing parts are inspected and maintained once a month.
7. Special parts inspection:
Check that the oil level in the main pump bearing seat should be kept above the axis.
Check whether there is fiber blockage on the filter screen, if so, clean it up.
8. Electrical parts inspection:
Check whether each electrical part is operating normally.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry