1. Preparation before operation
Equipment inspection:
Make sure the power connection of the dyeing machine is normal and check whether the equipment is in normal working condition.
Check whether there is any residual dye or other debris inside the dyeing machine to ensure cleanliness and hygiene.
Material preparation:
Prepare the fabric or yarn to be dyed and make sure they have been cleaned.
Prepare the required dyes and auxiliaries (such as acetic acid, diffuser, etc.).
Dye cup inspection:
Check whether the dye cup is leaking and make sure that the dye cup is well sealed.
The dye cup needs to be cleaned before use to avoid residue affecting the dyeing effect.
2. Operation steps
Power on and parameter setting:
Turn on the power and press the "Enter" key.
Set the dyeing process parameters according to the instrument instructions, including temperature, time, speed, etc.
For example, set the temperature to 110℃, the time to 30 minutes, and the speed to 3rpm.
Loading cloth sample:
Put the cloth sample to be dyed into the dye cup. The cloth sample needs to be moistened with hot water first to ensure uniform dyeing.
Put the dye cup into the experimental chamber of the dyeing machine.
Add dye:
Pour the prepared dye solution into the dye cup, making sure the amount of dye meets the process requirements.
For example, for a 5g cloth sample, 100ml of dye can be used, with a bath ratio of 1:20.
Run the dyeing program:
Click the "Run" button to observe whether the instrument is operating normally.
During the dyeing process, you can adjust parameters such as temperature or time as needed.
Dyeing completed:
After the dyeing program is completed, the dyeing machine will stop automatically.
Take out the dye cup and check the dyeing effect to ensure uniform color.
Cleaning and shutting down:
Clean the dye cup and the inside of the dyeing machine to ensure that the equipment is clean.
Turn off the power and disconnect the power plug.
III. Precautions
Safe operation:
Wear appropriate protective equipment such as gloves and goggles when operating.
Avoid putting your hands or other objects into the machine.
Temperature control:
Check the liquid level of the reference cup regularly to avoid temperature fluctuations caused by low liquid level.
Make sure the temperature probe is directly inserted into the dye cup to obtain accurate temperature readings.
Maintenance:
Clean the dye cup and dyeing machine regularly to prevent dye accumulation.
Calibrate the temperature probe regularly to ensure measurement accuracy.





