Cleaning Timing and Necessity
Regular cleaning of the dyeing vat is a crucial step in ensuring dyeing quality, especially in the following situations where thorough cleaning is essential:
1. When changing from dark to light colors: This is the most important time to prevent cross-contamination and avoid color differences.
2. After dyeing the same color for a long time: Even with the same color, prolonged operation can lead to dirt accumulation.
3. Pre-production inspection: If dye deposits forming sediment are found on the vat, turntable rollers, separating frames, jet columns, pipe walls, pump body, etc., they should be cleaned immediately.
Cleaning Methods and Steps
Different cleaning solutions are required for different types of deposits in the dyeing vat:
1. Specific Removal of Oligomers
Use sodium hydroxide solution or acidic sulfite compound cleaner to clean the tank, and use a high-temperature resistant dispersant to inhibit oligomer crystallization. During operation, the cooling rate must be controlled and the drainage process optimized to prevent secondary oligomer deposition.
2. Inorganic Salt Scale Treatment: For inorganic scale such as calcium salts, dilute hydrochloric acid or sulfuric acid can be used for chemical cleaning, but the concentration and contact time must be strictly controlled. This method poses a risk of corrosion to the inner wall of stainless steel; passivation treatment is recommended after cleaning.
3. Organic Contaminant Removal: For clumped dyes, tar-like substances, and greases, a composite cleaning process of sulfuric acid powder + liquid alkali + emulsifier is recommended. Through saponification reaction and mechanical stirring, stubborn organic matter is effectively decomposed.
4. Chemical Tank and Conveying Pipeline Cleaning: After cleaning the dyeing vat, the cleaning water from the vat should be poured into the chemical tank, and the chemical tank and conveying pipeline should be thoroughly cleaned. Finally, the dyeing machine and chemical tank should be rinsed with cold water until clean. This is a crucial step to ensure that the next batch of dyeing does not cause color differences due to residues.
5. Protection During Cross-Color Production: After producing red products, a transitional dyeing with blue dye is required, followed by thorough washing before producing white products. This is to prevent a color reaction between the fluorescent whitening agent and the red pigment. Cleaning Agent Selection and Operating Procedures
1. Specialized Cleaning Agent: Use specialized products such as "Guanjie Brand Dyeing Vat Cleaner," which has a high corrosion inhibition rate, does not damage stainless steel vats, and has a short and fast descaling time. Add approximately 15% cleaning agent to the mixing tank according to the total water capacity, and circulate or soak the vat at 30-50℃ for 2-5 hours.
2. Safe Operation: During cleaning, avoid opening the reflux valve when the dye liquor temperature exceeds 85℃ to ensure safe operation. After cleaning, the internal temperature must be reduced to below 80℃ and the pressure released before proceeding with subsequent operations.
Daily Maintenance Recommendations
1. Dedicated Vats: It is best to use dedicated machines for dark, medium, and light dyeing vats, and clean them weekly.
2. Regular Cleaning: Heat exchangers and filters should be cleaned every shift to prevent clogging that could affect dyeing temperature control. 3. Process execution: Ensure accurate weighing of dyes and chemicals, and thoroughly clean the dyeing vat with detergent when changing colors, especially when changing from dark to light.





